Canon EOS 5D MARK IV, Instruction Manual

Page: 578 / 676

576
Specifications
• Autofocus (during viewfinder shooting)
Type: TTL secondary image-registration, phase-difference
detection with the dedicated AF sensor
AF points: Max. 61 points (Cross-type AF point: Max. 41 points)
* Number of available AF points, Dual cross-type AF points,
and Cross-type AF points vary depending on the lens used.
* f/2.8-sensitive, Dual cross-type AF at five center
vertical AF points (AF group: With Group A lenses)
Focusing brightness
range: EV -3 - 18 (Conditions: f/2.8-sensitive center AF point,
One-Shot AF, room temperature, ISO 100)
Focus operation: One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing (MF)
AF area selection mode:Single-point Spot AF (manual selection), Single-point AF
(manual selection), AF point expansion (manual
selection: above, below, left, and right), AF point
expansion (manual selection: surround), Zone AF
(manual selection of zone), Large zone AF (manual
selection of zone), Automatic selection AF
AF point automatic
selection conditions: Based on EOS iTR AF setting
(Enables AF incorporating human face/color information)
* iTR: Intelligent Tracking and Recognition
AF Configuration Tool: Case 1 - 6
AI Servo AF
characteristics:
Tracking sensitivity, Acceleration/deceleration tracking,
AF point auto switching
AF function
customization: 17 functions
AF fine adjustment: AF Microadjustment (All lenses by the same amount,
Adjust by lens)
AF-assist beam: Emitted by the EOS-dedicated external Speedlite
• Exposure Control
Metering mode: Approx. 150,000-pixel RGB+IR metering sensor and
252-zone TTL open-aperture metering
EOS iSA (Intelligent Subject Analysis) system
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6.1% of viewfinder at center)
• Spot metering (approx. 1.3% of viewfinder at center)
• Center-weighted average metering
Metering brightness
range: EV 0 - 20 (at room temperature, ISO 100)