manualshive.com logo in svg

Canon EOS 5D MARK IV, Instruction Manual

Share
Download
Canon EOS 5D MARK IV Instruction Manual Download Page 477

475

W

 Digital Print Order Format (DPOF)

 

All images

If you select [

Mark all on card

], one 

copy of all the images on the card will be 
set for printing.
If you select [

Clear all on card

], the print 

order will be cleared for all the images on 
the card.

 

Note that RAW images and movies will not be included in the print order 
even if you set [

By

n

] or [

All images

].

 

When using a PictBridge-compatible printer (Wireless LAN), do not 
specify more than 400 images for one print order. If you specify more 
than this, the images may not all be printed.

Summary of Contents for EOS 5D MARK IV





































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands