manualshive.com logo in svg

Canon EOS 5D MARK IV, Instruction Manual

Share
Download
Canon EOS 5D MARK IV Instruction Manual Download Page 567

565

Troubleshooting Guide

 

If you move the camera to the left or right (panning) or shoot a 
moving subject, the image may look distorted. The problem may 
be more noticeable in time-lapse movie shooting.

 

High Frame Rate movies do not record sound.

 

For High Frame Rate movie shooting, if [

Free run

] is set for 

[

Count up

] under [

z

5: Time code

] (p.365), the time code will not 

be appended. Also, if there is HDMI output, the time code will not 
be appended to the HDMI video output (p.367).

 

For High Frame Rate movie shooting, it will count up by 4 sec. for 
every sec. in real time (p.358).

 

Still photos cannot be taken during movie shooting. To take still 
photos, stop the movie shooting and take still photos using 
viewfinder shooting or Live View shooting.

The subject looks distorted during movie shooting.

The movie does not record the sound.

The time code is not appended.

The time code’s count is faster.

I cannot take still photos during movie shooting.

Summary of Contents for EOS 5D MARK IV





































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands