Canon EOS 5D MARK IV, Instruction Manual

Page: 174 / 676

3
Setting the Image-Recording Quality
172
The number of possible shots is based on Canon’s testing standards and an 8
GB card.
The maximum burst is with Canon’s standard testing CF card (Standard: 8 GB,
High speed: UDMA Mode 7, 64 GB) and SD card (Standard: 8 GB, High speed:
UHS-I, 16 GB), and based on the following conditions set by the Canon’s
testing standard: <
o
> High-speed continuous shooting, 3:2 aspect ratio,
ISO 100, Dual Pixel RAW shooting disabled, Standard Picture Style, IPTC
information not appended.
The file size, number of possible shots, and maximum burst will vary
depending on the subject, card brand, ISO speed, Picture Style, Custom
Functions, and other settings.
“Full” indicates that shooting is possible until the card becomes full with the
listed conditions.
Even if you use a UDMA CF card or high-speed SD card, the maximum
burst indicator remains the same. However, the maximum burst shown in
the table on the preceding page applies to continuous shooting.
If you select both RAW and JPEG, the same image will be recorded
simultaneously to the card in both RAW and JPEG at the image-
recording qualities that were set. The two images will be recorded with
the same file numbers (file extension: .JPG for JPEG and .CR2 for
RAW).
The image-recording quality icons indicate as follows:
1
(RAW),
41
(Medium RAW),
61
(Small RAW), JPEG (JPEG),
7
(Fine),
8
(Normal),
3
(Large),
4
(Medium), and
6
(Small).