Canon EOS 5D MARK IV, Instruction Manual

Page: 508 / 676

7
Custom Controls
N
506
While the metering timer is active, you can set the ISO speed by turning
the <
5
> dial. If this control is used with ISO Auto set, you can set the
ISO speed manually. (Even after the metering timer (
0
) ends, ISO
Auto will not be restored.) If you use this function in the <
a
> mode, you
can adjust the exposure with the ISO speed while maintaining the
current shutter speed and aperture value.
You can set the exposure compensation by holding down <
0
> and
turning the <
6
> dial. Useful when you want to set exposure
compensation in <
a
> manual exposure with ISO Auto set.
You can set the exposure compensation by holding down <
p
> (AF
area selection) button and turning the <
6
> dial. Useful when you
want to set exposure compensation in <
a
> manual exposure with ISO
Auto set.
In <
a
> manual exposure, you can set the shutter speed with the
<
6
> or <
5
> dial.
In <
a
> manual exposure, you can set the aperture with the <
5
> or
<
6
> dial.
: Set ISO speed ( during metering)
: Exposure compensation (hold button, turn )
: Exposure compensation (hold button, turn )
: Shutter speed setting in M mode
: Aperture setting in M mode
The following will work even while the <
R
> switch is set to the right
(Multi function lock, p.62): [ : Set ISO speed (hold btn, turn ) ]
(p.505) and [ : Exposure compensation (hold btn, turn ) ].