Canon EOS 5D MARK IV Instruction Manual Download Page 117

Page: 117 / 676

115

Autofocusing with 61 points is possible. All the AF area selection modes
are selectable.

: Dual cross-type AF point. Subject

tracking is superior and the focusing
precision is higher than with other AF
points.

: Cross-type AF point. Subject

tracking is superior and high-
precision focusing is achieved.

: AF points sensitive to horizontal

lines.

Lenses and Usable AF Points

Group A

Although the camera has 61 AF points,

the number of usable AF

points, focusing patterns, Area AF frame shape, etc. vary
depending on the lens. The lenses are thereby classified into
eleven groups from A to K.

When using a lens in groups G to K, fewer AF points will be usable.

Lens groups are listed on pages 122-126. Check which group your
lens belongs to.

When you press the <

> button, the AF points indicated by the mark

will blink. (The / / AF points will stay lit.) Regarding lighting up or
blinking of the AF points, see page 108.

Regarding new lenses released after the EOS 5D Mark IV (in the second
half of 2016), check the Canon Web site to see which group they belong
to.

Some lenses may not be available in certain countries or regions.

Summary of Contents for EOS 5D MARK IV





































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EOS 5D MARK IV

Reviews:

Brands by name

Popular brands

Canon EOS 5D MARK IV, Instruction Manual

Search results

Summary of Contents for EOS 5D MARK IV

Reviews:

Brands by name

Popular brands