manualshive.com logo in svg

Canon EOS 5D MARK IV, Instruction Manual

Share
Download
Canon EOS 5D MARK IV Instruction Manual Download Page 441

439

You can either select and erase unnecessary images one by one or 
erase them in one batch. Protected images (p.412) will not be erased.

1

Select the image to be erased.

 

Press the <

x

> button to play back 

images.

 

Turn the <

5

> dial to select the 

image to be erased.

2

Press the <

L

> button.

X

The Erase menu will appear.

3

Erase the image.

 

Select [

Erase

], then press <

0

>. The 

image displayed will be erased.

L

 Erasing Images

Erasing a Single Image

Once an image is erased, it cannot be recovered. Make sure you no 
longer need the image before erasing it. To prevent important images 
from being erased accidentally, protect them. Erasing a RAW+JPEG 
image will erase both the RAW and JPEG images.

Setting [

8

4: Default Erase option

] to [

[Erase] selected

] makes it faster to 

erase images (p.492).

Summary of Contents for EOS 5D MARK IV





































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands