Canon EOS 5D MARK IV, Instruction Manual

Page: 109 / 676

107
S
Selecting the AF Area and AF Point
N
You can manually select the AF point or zone.
1
Press the <
S
> button
(
9
)
.
X The AF points will be displayed in the
viewfinder.
In AF point expansion modes,
adjacent AF points will also be
displayed.
In the Zone AF or Large Zone AF
mode, the selected zone will be
displayed.
2
Select an AF point.
The AF point selection will change in
the direction you tilt <
9
>. If you
press <
9
> straight down, the center
AF point (or center zone) will be
selected.
You can also select a horizontal AF
point by turning the <
6
> dial and
select a vertical AF point by turning
the <
5
> dial.
In the Zone AF and Large Zone AF
modes, turning the <
6
> or <
5
>
dial will change the zone (in a looping
sequence for Zone AF).
Selecting the AF Point Manually
When [
2
4: Initial AF pt, AI Servo AF ] is set to [
Initial
AF pt
selected ] (p.146), you can use this method to manually select the AI
Servo AF’s initial position.
When you press the <
S
> button, the LCD panel displays the following:
• Zone AF, Large Zone AF, Automatic selection AF: AF
• Single-point spot AF, Single-point AF, AF point expansion: SEL
(Center), SEL AF (Off center)