Canon EOS 5D MARK IV, Instruction Manual

Page: 327 / 676

325
Focusing with AF (AF Method)
In the [ FlexiZone - Multi ] and
[ FlexiZone - Single ] modes, either press
the <
u
> button or tap on [
d
] displayed
on the bottom right of the screen. You
can magnify the image by approx. 5x or
10x and check the focus.
Magnified view is not possible with
[
u
+Tracking ].
To move the AF point or select a zone, operate <
9
> or tap on the
spot you want to magnify.
Either press the <
u
> button or tap on [
d
] to magnify the image.
Each time you press the <
u
> button or tap on [
d
], the
magnification ratio changes.
When [ FlexiZone - Multi ] is set, the image will be magnified at the
center of the zone frame (or image center with automatic selection).
When [
FlexiZone - Single ] is set, the image will be magnified at the
AF point.
At 100% (approx. 1x) magnification, operate <
9
> or tap on the
screen to move the magnifying frame. Pressing <
9
> or <
0
> will
return the magnifying frame to the screen center.
Either press the <
u
> button or tap on [
d
] to magnify the area
covered by the magnifying frame.
When the image is magnified by approx. 5x or 10x, you can change
the magnified area by operating <
9
> or tapping on the triangle on
the screen top, bottom, left, or right.
When you press the shutter button halfway, the normal view will
return for [
FlexiZone - Multi ]. For [ FlexiZone - Single ], AF will
proceed with the magnified view.
With Servo AF and magnified view, pressing the shutter button
halfway will return to the normal view for focusing.
Magnified View