Canon EOS 5D MARK IV, Instruction Manual

Page: 631 / 676

W-17
NFC Function
4
Add [ X ] to [Allow NFC
connections].

Displayed when [ Wi-Fi/NFC ] is set to
[ Enable ].

Press the <
B
> button to add or
remove [ X ]. Add [ X ], then press
<
0
>.
 When a nickname (for identification)
is not registered, a registration screen
is displayed (p.W-8).
When establishing wireless communications using the NFC function,
see the following pages.
Connecting to a smartphone wirelessly: page W-21*
Sending images to a smartphone: page W-31*
Connecting to Connect Station: page W-44
* When connecting to a smartphone, see pages W-18 and W-20 as well.
NFC Function Cautions

This camera cannot be connected to other NFC-enabled devices, such
as printers, using the NFC function.

A connection cannot be established using the NFC function while
shooting with the camera, when there is no card, or while the camera is
connected to another device with an interface cable.

To connect the camera to an NFC-enabled smartphone, the
smartphone’s Wi-Fi and NFC functions must be enabled.
A connection can be established even when the camera’s power is in the
auto power off state. However, if a connection cannot be established, cancel
auto power off, then establish a connection.