Canon EOS 5D MARK IV, Instruction Manual

Page: 281 / 676

279
You can connect any EOS accessory equipped with an N3-type terminal
such as the Remote Switch RS-80N3 or Timer Remote Controller TC-
80N3 (each sold separately) to shoot with the camera (p.525).
To operate the accessory, refer to its Instruction Manual.
1
Open the terminal cover.
2
Connect the plug to the remote
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
silver part and pull it out.
Using a Remote Switch
R
Remote Control Shooting
With Remote Controller RC-6 (sold separately), you
can shoot remotely up to approx. 5 meters/16.4 feet
away from the camera (when you are facing the front
of the camera). You can either shoot immediately or
with a 2-sec. delay.
1
Focus on the subject.
2
Set the lens’s focus mode switch
to <MF>.
You can also shoot with <
f
>.
3
Press the <
o
> button
(
9
)
.