Canon EOS 5D MARK IV, Instruction Manual

Page: 488 / 676

3
Custom Function Settings
N
486
Same exposure for new aperture
C.Fn1
If the <
a
> mode (manual exposure shooting) is set and the ISO
speed is set manually (except when set to ISO Auto), the open
aperture value may change to a higher number (a smaller aperture) if
you perform any of the following: 1. Change the lens, 2. Attach an
extender, or 3. Use a zoom lens whose open aperture value (f/number)
changes. If you then shoot while the maximum aperture is set, the
image will be underexposed by the amount the maximum aperture f/
number changes to a higher number. However, by changing the ISO
speed or shutter speed (Tv) automatically, you can obtain the same
exposure that would be obtained without performing 1, 2, or 3.
OFF: Disable
Automatic changes in settings to maintain the specified exposure
will not be applied. The ISO speed, shutter speed, and aperture
already set will be used for shooting. If you perform 1, 2, or 3 and
the maximum aperture becomes slower, adjust the ISO speed and
shutter speed before you shoot.
ISO: ISO speed
If you perform 1, 2, or 3, a higher ISO speed will be set
automatically to compensate for the number of stops the maximum
aperture has become slower. The same exposure that would be
obtained without performing 1, 2, or 3 is thereby obtained. The ISO
speed will change automatically within the range set with [
Range
for stills ].
ISO/Tv: ISO speed/Shutter speed
If you perform 1, 2, or 3, a higher ISO speed will be set
automatically to compensate for the number of stops the maximum
aperture has become slower. If the ISO speed reaches the upper
limit of the range set with [
Range for stills ], a slower shutter
speed will be set automatically. The same exposure that would be
obtained without performing 1, 2, or 3 is thereby obtained. The
shutter speed will change automatically within the range set with
[
8
2: Set shutter speed range ].