manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 92

91

•  If a network problem causes a replication error, unsynced data may be shown as "0" even though replication 

is incomplete. Click 

Resync

 to recover from the replication error. All files from the source folder will be copied 

to the target folder.

Failover

With failover, two TeraStations are connected to the network for redundancy. If a problem occurs in the main 
TeraStation so that it can no longer be accessed, operation is automatically switched to the backup TeraStation.

Note: 

Use identical model and capacity TeraStations for the main TeraStation and backup TeraStation. If the 

capacity of the main TeraStation is larger than that of the backup TeraStation, an I33 replication error will occur.

Ethernet Cable Connection Methods

Two different configurations for failover are available.

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands