manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 51

50

Encrypting Drives

Internal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays are 
then readable only from that specific TeraStation. To unencrypt a drive or array, uncheck "Encryption" and format it 
again.

Media Cartridges

If configured as a media cartridge, an internal drive can be used as a removable storage device in the same way as 
an external drive. Media cartridges can be unplugged and connected to a different TeraStation with all data intact.
To configure a drive as a media cartridge, check "Media Cartridge" during formatting. To return it to its original state, 
uncheck "Media Cartridge" and reformat the drive.

Media cartridges do not support:
•  RAID arrays 
•  LVM volumes 
•  Access restrictions
•  Direct connection to a Windows computer

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands