manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 53

52

4 

The "Confirm Operation" screen will open. Enter the confirmation number, then click 

OK

.

5 

All data on the TeraStation will be permanently erased.

Disk Quotas

You can set a disk quota to limit drive space for each user or group. You can also set an alert space. If the drive space 
exceeds the set alert space, an email notification is sent. To configure email notifications for disk quota, refer to the 
"Email Notification" section in chapter 10.

Notes: 

•  When using quotas, disable the recycle bin or empty the trash folder often. The limited space includes the 

space used for trash.

•  Quotas apply per drive or per array. If a quota is set to 1 GB, each array or drive can use a maximum of 1 GB.
•  Quotas cannot be set for external hard drives connected to the TeraStation and hard drives that are 

configured as media cartridges.

•  If both user and group quotas are configured for a user, the most restrictive quota will always apply.
•  Make sure that SMB2 is disabled before using quotas on the TeraStation.

Quotas for Users

Follow this procedure to limit the shared folder disk space available for a user.

1 

In Settings, click 

File Sharing

.

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands