manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 182

181

Troubleshooting:

If the settings are not saved to the USB memory device successfully, you may receive the error message "The 
specified operation cannot be executed.". Verify:
•  The device is connected to a USB 2.0 port, not a USB 3.0 port.
•  The device has a capacity of 1 GB or larger.
•  The device is not write-protected.

Applying Settings

The saved settings can be applied to a different TeraStation (of the same series).

1 

Connect the USB memory device with the saved settings to a USB 2.0 port of the TeraStation (not a USB 3.0 
port).

2 

In Settings, click 

Management

.

3 

Click 

 to the right of "Configuration Management".

4 

From "Target USB drive", select the USB memory device that is connected to the USB 2.0 port of the 
TeraStation.

5 

Select "Transfer settings from a USB drive", then click 

Execute

.

6 

The "Confirm Operation" screen will open. Enter the confirmation number, then click 

OK

.

7 

When the following message is displayed, applying settings is finished. Click 

OK

.

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands