manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 173

172

Notes: 

•  Don't disable the SMB protocol while DFS is enabled. If you do, you will need to enable SMB again and 

reconfigure DFS from scratch.

•  TeraStations, LinkStations, and SMB-compatible Windows computers can be specified as DFS link targets 

(Mac OS and Linux are not supported).

Accessing from an NFS Client

Note: 

(US purchasers only) Buffalo's customer support will help configure the NFS settings on your TeraStation, 

and will support VMware and Windows clients but will not provide support for configuring your Linux or 
other UNIX clients. There are many types of UNIX and the procedures for configuring NFS with them will vary 
considerably. For help configuring your NetWare, Linux, or other UNIX clients for NFS support please consult 
each client's own documentation and support.

1 

In Settings, click 

File Sharing

.

2 

Click 

 to the right of "Folder Setup".

3 

Choose the shared folder that will be accessible to the NFS client.

4 

Click 

Edit

.

5 

Under "LAN Protocol Support", check "NFS" and click 

OK

.

Note the NFS path. It will be used later for accessing data from an NFS client.

6 

Click 

Close

.

7 

Move the NFS switch to the 

 position to enable NFS.

8 

Click 

 to the right of "NFS".

9 

Click 

Client Settings

.

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands