manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 62

61

3 

Right-click the disk volume that shows the status "Unallocated" and click 

New Simple Volume

 from the 

displayed menu. Follow the screen to finish formatting.

Formatting a volume is finished. When the formatting process is completed, the drive will be visible as an icon in 
Computer or My Computer and can be used as a normal drive on the computer.

Disconnecting a Volume

1 

In Windows, navigate to 

Control Panel

 - 

Administrative Tools

 - 

iSCSI Initiator

.

The status of the connecting volume will be displayed as "Connected" under "Discovered targets".

2 

Select a volume to disconnect and click 

Disconnect

.

3 

Click 

Yes

.

4 

When the volume status is displayed as "Inactive", the disconnection was carried out properly.

Disconnecting a volume is finished.

Using Buffalo iSCSI Connection Tool

Connecting a Volume

To connect a volume using Buffalo iSCSI Connection Tool from a Windows computer, follow the procedure below.

1 

Click 

Start

 - 

Programs

 - 

Buffalo

 - 

iSCSI Connection Tool

 - 

iSCSI Connection Tool

.

iSCSI Connection Tool will open.

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands