manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 41

40

8 

Select a RAID mode and the drives to be used, then click 

Create RAID Array

.

9 

Step through the wizard to create the array.

Notes: 

•  You can also configure RAID settings from Easy Admin.
•  After changing the RAID mode, create a shared folder.

Configuring a Hot Spare

If you have a hot spare configured and an array fails, the TeraStation immediately switches over to the hot spare. To 
use a hot spare, you need an extra drive that's not part of any array and a RAID 1, RAID 10, RAID 5, or RAID 6 array.

Notes: 

•  All data on the hot spare drive is deleted when it is configured as a hot spare and again when it changes from 

a spare to a drive in the array.

•  A hot spare cannot be configured for TeraStation models with only two hard drives. Use RAID 1 instead.

1 

In Settings, click 

Drives

.

2 

Click 

 to the right of "RAID".

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands