manualshive.com logo in svg

Buffalo TeraStation TS3200D, User Manual

Share
Download
Buffalo TeraStation TS3200D User Manual Download Page 206

205

LCD Message

Description

Corrective Action

E11 Fan Failure

An error occurred in the fan speed.

Check that no foreign objects or dust are 
clogging the fan. If any foreign objects or 
dust are found, use a pair of tweezers, air 
duster, or other tool to remove them. If the 
error is displayed again, contact Buffalo 
technical support for assistance.

E12 Cooling 
Failure

A rise in the system temperature may have 
exceeded the allowable safety value.

Do not place objects in the area around the 
TeraStation. Also, move the TeraStation to a 
cool location.

E14 Can't Mount 
Array x

RAID array x cannot be mounted.

Run the RAID array disk check in Settings.

E16 Drive x Not 
Found

Unable to find drive x.

Hard drive x may be disconnected or may 
have failed. After shutting down, reinstall the 
hard drive.

E22 Can't Mount 
Drive x

Mounting of hard drive x failed.

Format the hard drive. After formatting, if the 
error still appears after rebooting, replace 
the hard drive. If the error is displayed 
again, contact Buffalo technical support for 
assistance.

E27 Lost Failover 
Target

Unable to find the backup TeraStation.

In the main TeraStation's settings, navigate 
to 

Backup

 - 

Failover

 to reconfigure the 

backup TeraStation for failover.

E30 Replace Drive 
x

An error occurred, so hard drive x was 
removed from the RAID array.

Replace hard drive x.

Status

After you change settings or format a hard drive, the current status is displayed on the LCD.

LCD Message

Description

Corrective Action

I11 Bad Sectors on 
Drive x

The bad sectors in hard drive x may 
have reached a dangerous level.

Replace hard drive x.

I12 Degraded Mode Operating in degraded mode.

-

I13 Formatting 
Array x...

Formatting RAID array x.

-

I14 Checking Array 
x…

Checking RAID array x.

-

I15 Scanning Array 
x Data...

Examining the error status of RAID 
array x.

-

I16 Creating Array 
x...

Creating RAID array x.

-

I17 Resyncing Array 
x...

Resynchronizing RAID array x.

-

I18 Rebuilding 
Array x...

Rebuilding RAID array x.

-

I19 Filling Array x 
with 0s

Writing 0s to RAID array x and 
erasing all data.

-

I20 Formatting 
Drive x...

Formatting hard drive x.

-

I21 Checking Drive 
x...

Checking hard drive x.

-

I22 Filling Drive x 
with 0s

Erasing the data on hard drive x.

-

Summary of Contents for TeraStation TS3200D























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands