Buell 2004 XB9S, Service Manual

Page: 246 / 597

2004 Buell Lightning: Engine 3-43
HOME
33. See Figure 3-57. Install muffler with Torca clamp but do
not tighten:
a. Install rear muffler straps (13) and alternately tighten
rear strap fasteners (12) until properly tightened to
48-60 in-lbs (12.2-13.6 Nm).
b. )Install new front muffler strap (8) with fastener and
tighten to 108-120 in-lbs (12.2-13.6 Nm).
c. Tighten Torca clamp (1) to 40-45 ft-lbs (54.2-61
Nm).
d. Tighten front muffler mount (2) to 22-55 ft-lbs (29.8-
33.9 Nm).
34. See Figure 3-58. Connect throttle cables to induction
module/throttle body.
35. Connect the following sensors:
a. Temperature sensor [90].
b. Oxygen sensor [137]. (Install cable wrap on har-
ness).
36. See Figure 3-58. Install the ignition coil and spark plug
wires and connect [83s]. Tighten ignition coil fasteners to
120-144 in-lbs (13.6-16.3 Nm).
Figure 3-58. Electrical Connections and Throttle Cables (Typical)
1. Ignition coil
2. Coil connection [83]
3. Cylinder head temperature sensor connection [90]
4. Oxygen sensor connection [137]
5. Throttle cables
5
3
2
1
8708
4