Buell 2004 XB9S, Service Manual, Page: 239 / 597

3-36 2004 Buell Lightning: Engine
HOME
24. See Figure 3-49. The feed oil line at the rear of the of the
oil pump should be tightened to 27-29 ft-lbs (36.6-39.3
Nm). When the oil line has been properly torqued, the
orientation of the line should be approximately 7 o’clock.
25. Also tighten the return oil line at the top front oil pump fit-
ting to 22-24 ft-lbs (29.8-32.5 Nm). When the oil line has
been properly torqued, the orientation of the line should
also be approximately 7 o’clock.
26. Tighten the vent oil line at the gearcase cover to 12-13 ft-
lbs (16.3-17.6 Nm).
NOTE
When tightening the vent line, verify that the line does not
twist down towards the muffler, but remains horizontal and
aligned with the feed and return lines after tightening.
Figure 3-49. Approximate Seven O’Clock Orientation of Oil Feed Line and Oil Return Line at the Oil Pump
8769a
8767