Buell 2004 XB9S, Service Manual

Page: 238 / 597

2004 Buell Lightning: Engine 3-35
HOME
20. See Figure 3-48. Install the return, feed and vent oil lines
starting at the swingarm/oil reservoir and working
towards the front of the vehicle. Leave all oil line fittings
loose at this time.
NOTE
Once the three main oil lines are attached, it will be neces-
sary to follow the proper torquing sequence. The three main
oil lines must be torqued at the swingarm/oil reservoir first.
21. See Figure 3-48. Tighten the return oil line first making
sure to maintain the proper clearance between the oil
line and the rear muffler bracket. 23-25 ft-lbs (31.2-33.9
Nm).
22. Tighten the feed oil line next making sure the distance
between the feed line and the return line is within specifi-
cations. 24-26 ft-lbs (32.5-35.2 Nm).
23. Tighten the vent oil line next making sure the distance
between the vent line and the feed line is within specifi-
cations. 17-19 ft-lbs (23-25.8 Nm).
Figure 3-48. Oil Line Clearances
8765
3
2
1
1. 5/16-3/8 in. (8-9.53mm) 2. 37/64-45/64 in. (14.68-17.86mm) 3. 1/4-23/64 in. (6mm - 9.13mm)
Vent
Feed Return.