BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 19 / 211

RIDING THE VEHICLE
NOTE:
You may need to detach tether
cord from your clothes to check lights.
In such a case, attach cord as soon
as you get back at the controls of the
snowmobile.
2. Check the engine cut-off switch (by
pulling tether cord cap) and emer-
gency engine stop switch opera-
tion.
3. Release parking brake.
4. Refer to the
WARM UP
section and
follow instructions.
Pre-Ride Check List
ITEM OPERATION
✔
BODY INCLUDING SEAT,
FOOTRESTS, LIGHTS, AIR FILTER,
CONTROLS AND INSTRUMENTS
Check condition and remove snow or ice.
SKIS AND STEERING ACTION
Check for free movement and proper
operation.
FUEL AND INJECTION OIL (IF
APPLICABLE)
Check for proper level and no leaks.
COOLANT Check for proper level and no leaks.
BRAKE FLUID Check for proper level and no leaks.
STORAGE COMPARTMENT
Check for proper latching and no heavy or
breakable objects.
THROTTLE LEVER Check for proper action.
TRACK Check condition and remove snow or ice.
BRAKE LEVER Check for proper operation.
PARKING BRAKE, BRAKE
Check for proper operation.
EMERGENCY ENGINE STOP
SWITCH AND ENGINE CUT-OFF
SWITCH (TETHER CORD CAP)
Check for proper action. Tether cord must be
attached to operator clothing eyelet.
LIGHTS
Check for proper operation.
SKIS AND RUNNERS Check for proper operation.
SLIDER SHOES Check for proper operation.
INSPECT DRIVE BELT
Check condition for cracks, fraying or
abnormal wear.
________
SAFETY INFORMATION
________
17