BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 57 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
See table below for usual pilot lamps information. Refer to
MONITORING SYS-
TEM
for details on malfunction pilot lamps.
PILOT
LAMP(S)
ON
BEEPER DESCRIPTION
4 short
beeps every
5 minutes
E-TEC: Injection oil level is low. Stop vehicle in a safe
place then, replenish injection oil reservoir.
—
Low fuel level. One (1) bar left in fuel level display.
Replenish fuel tank as soon as possible.
Long beeps
repeating slowly
Reverse is selected.
3 short beeps Reverse did not engage, try again.
—
High beam headlights are selected.
— —
E-TEC: Engine and/or injection oil need to warm-up
before normal operation. The engine's RPM is limited
until desired temperature is reached.
ACE and 1200 4-TEC
—
ECO mode is selected.
—
Standard mode is selected.
SPORT
MODE
—
Sport mode is selected.
5) SET (S) Button
Button used to navigate, adjust or re-
set gauge multifunction display.
In order to memorize settings, engine
must be running.
NOTE: SET (S) button on the multi-
function switch has the same func-
tions and can also be used.
_______________
55