BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 53 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2014-004-001_f
MULTIFUNCTION GAUGE
1. MODE function
2. SET function
9) Seat Latch
Operator's seat can be removed to ac-
cess to the Operator's Guide (located
in seat base) or for maintenance pur-
poses.
Seat latch is located at the front of the
seat.
Seat Removal
To remove the operator's seat, pro-
ceed as follows:
NOTE: On Grand Touring models, it
is necessary to remove the passen-
ger seat. Refer to
PASSENGER SEAT
(2-UP MODELS) .
Pull front of seat cushion, firmly push
seat forward to unload latch, then pull
tab to unlock seat.
mmo2013-004-018_a
TYPICAL
1. Seat latch
mmo2007-009-071_c
1. Seat latch
Pull and hold seat latch, then, pull seat
with a rearward movement.
NOTE: On models with a heated seat,
disconnect the electrical connector lo-
cated underneath the seat.
NOTICE
Do not stretch the electri-
cal connector and wiring.
mmo2013-004-019_a
TYPICAL
Step 1: Push seat forward
Step 2: Pull and hold seat latch
Step 3: Pull seat with a rearward movement
Seat Installation
NOTICE
Riding the vehicle with
any objects between the seat and
the fuel tank could damage the fuel
tank. NEVER place any objects be-
tween seat and fuel tank.
Position seat in place.
NOTE: On models equipped with a
heated seat, connect the electrical
connector.
Push seat forward until it latches in po-
sition.
_______________
51