BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 145 / 211

STORAGE
5. Release all buttons when gauge dis-
plays
PUSH (S)
appears.
6. Again, press and hold the SET (S)
button for 2 - 3 seconds.
NOTE:
The gauge will display OIL
when the storage procedure is initi-
ated.
7. When gauge displays
OIL
, release
button and wait for the lubrication
function to end.
mmr2009-004-004
Do not touch anything during engine lu-
brication cycle.
The engine lubrication function takes
approximately 1 minute. During this
time the engine RPM will increase
slightly to approximately 1600 RPM
and the oil pump will "oil flood" the en-
gine.
At the end of engine lubrication proce-
dure, the ECM will turn the engine off.
Remove tether cord cap from engine
cut-off switch.
NOTICE
Do not start the engine
during storage period.
______________
143