BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 124 / 211

MAINTENANCE PROCEDURES
mmo2014-004-012_a
TYPICAL
1. Drain plugs access cover
mmo2014-004-012_b
TYPICAL - PIVOT THE ACCESS COVER
1. Retaining screws
6. From underneath vehicle, clean
drain plug area.
mmr2009-111-101_a
1. Frame opening to reach drain plug
7. Place a drain pan under frame open-
ing.
8. Remove engine oil drain plug and
discard sealing washer.
9. Allow oil to drain completely.
10. Install NEW sealing washer and
O-ring on oil drain plug.
NOTICE
Never use a sealing
washer a second time. Always re-
place with a new one.
mmr2009-111-005_a
1. Sealing washer
2. O-ring
3. Oil drain plug
11. Install drain plug and tighten to
specification.
TIGHTENING TORQUE
Drain plug 30 N•m (22 lbf•ft)
12. Replace
OIL FILTER
, see proce-
dure in this subsection.
13. Refill oil tank at the proper level
with the recommended oil.
APPROXIMATE ENGINE OIL
CAPACITY (WITH FILTER)
3.5 L (3.7 qt (U.S. liq.))
14. Reinstall dipstick in oil tank.
15. Start engine and let it idle for a few
minutes.
16. Ensure there are no leaks.
17. Stop engine and check oil level as
explained in this subsection. Refill
as necessary.
18. Dispose oil and filter as per your lo-
cal environmental regulations.
122
______________