BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 77 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2013-003-003_a
1. Retaining pin
Lift rear portion of guard then release
from front tab by pivoting the guard
outwards.
Drive Belt Guard Installation
When reinstalling belt guard, position
its cutaway toward front of snowmo-
bile.
Insert the tab into the slot and push it
into place
mmo2013-004-024_a
TYPICAL
1. Tab
Position the grommet over the retain-
ing rod. It may be necessary to slightly
lift the console to make room.
mmo2009-003-011_a
TYPICAL
1. Retaining rod
Position rear portion of the belt guard
over the retainer and secure it using
the retaining pin.
NOTE: Make sure rear portion of the
belt guard is properly positioned on the
stopper.
mmo2013-003-003_a
1. Retaining pin
18) Spare Drive Belt Holder
A spare drive belt can be stored in its
holder located on the drive belt guard.
NOTE: The spare drive belt is not sup-
plied with the snowmobile.
Position spare drive belt into drive belt
guard slot.
Secure in place by sliding it into the fas-
tener tabs.
_______________
75