BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 143 / 211

VEHICLE CARE
Post-Operation Care
Remove snow and ice from rear sus-
pension,
track, front suspension,
steering mechanism and skis.
WARNING
Make sure tether cord cap is away
from engine cut-off switch before
standing in front the vehicle, get-
ting close to the track or rear sus-
pension components.
Always cover your snowmobile when
leaving it outside overnight or during
extended periods of inactivity. This
will protect it from frost and snow as
well as help retain its appearance.
Vehicle Cleaning and
Protection
Wash snowmobile with water mixed
with a mild detergent. Use only mi-
crofiber cloths or an equivalent.
NOTICE
It is necessary to use
microfiber cloths or equivalent on
windshield and hood to avoid dam-
aging further surfaces to clean.
To remove grease, oil and grime, use
BRP HEAVY DUTY CLEANER (P/N 293
110 001).
NOTICE
Do not use Heavy duty
cleaner on decals or vinyl.
To remove stubborn dirt from all plastic
and vinyl surfaces, use XPS ALL PUR-
POSE CLEANER (P/N 219 701 709).
NOTICE
Never clean plastic parts
or hood with strong detergent, de-
greasing agent, paint thinner, ace-
tone, products containing chlorine,
etc.
Wax painted portion of the vehicle for
better protection.
NOTE: Apply wax on glossy finish
only.
______________
141