BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 130 / 211

MAINTENANCE PROCEDURES
A A A AC C C CE E E E a aa an n n nd d d d 1 1 1 12 2 2 20 0 0 00 0 0 0 4 4 4 4----T T T TE E E EC C C C
mmo2011-003-017_a
TYPICAL
1. Check plug
mbs2010-019-001_a
1. Filler cap
A A A Allllllll M M M Mo o o od d d de e e elllls ss s
Pour recommended oil in chaincase by
the filler hole until oil comes out by the
check plug hole.
Reinstall check plug and tighten to
specification.
TIGHTENING TORQUE
Check Plug
6 N•m ± 1 N•m
(53 lbf•
in
± 9 lbf•
in
)
Reinstall the filler cap.
Drive Chain
Access to Chaincase
Open RH side panel, refer to
CON-
TROLS, INSTRUMENTS AND EQUIP-
MENT
.
Drive Chain Adjustment
1. Remove muffler, refer to
EXHAUST
SYSTEM
in this subsection.
2. Unscrew tensioner lock nut several
turns.
mmr2009-085-002_a
1. Tensioner adjustment screw
2. Lock nut
3. Seal washer
3. Unscrew tensioner adjustment
screw a few turns.
4. Pull seal washer back.
5. Clean adjustment screw threads if
necessary.
NOTICE
Adjustment screw
threads must be clean to obtain an
accurate adjustment.
6. Tighten tensioner adjustment
screw by hand.
NOTE: Turn adjustment screw until
resistance is strong enough that it can
not be turned by hand.
7. Hold tensioner adjustment screw
and tighten lock nut to specification.
TIGHTENING TORQUE
Check lock nut
36 N•m ± 3 N•m
(27 lbf•ft ± 2 lbf•ft)
8. Install muffler.
128
______________