BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 136 / 211

MAINTENANCE PROCEDURES
mmr2009-133-001_a
mmr2009-133-002_a
1. Deflection O-ring aligned with slider shoe
9. Read load recorded by the upper
O-ring on the tensiometer.
mmr2009-133-003_a
LOAD READING
1. Upper O-ring
10. Load reading must be as per the
following table.
TRACK ADJUSTMENT
SPECIFICATION
Track deflection
setting
All models
except
Expedition
30 mm - 35 mm
(1-3/16 in - 1-3/8 in)
Track deflection
setting
Expedition
45 mm - 50 mm
(1-3/4 in - 1-31/32 in)
Track load
reading
6 kgf to 8.5 kgf
(13 lbf to 19 lbf)
11. If load reading is not in accordance
with the specification, adjust track
tension. Refer to
TRACK TEN-
SION ADJUSTMENT
.
Track Tension Adjustment
1. Remove tether cord cap from en-
gine cut-off switch.
2. Remove rear wheel caps (if so
equipped).
mmo2013-004-030_a
rMOTION
1. RH rear idler wheel cap
3. Loosen the rear idler wheel retain-
ing screw and nut.
134
______________