BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 73 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
NOTE:
Pressing the SET (S) button will
stop time of the lap in progress, then
the display will show the recorded time
length of that lap and will switch auto-
matically to the following recorded lap
after 5 seconds.
At the end of all recorded laps, STOP
will appear in display.
To review recorded data again, press
the SET (S) button to return to PLAY
mode. Repeat same procedure previ-
ously described to review.
To record other laps, press the SET (S)
button to switch to REC (record) mode.
Repeat same procedure previously de-
scribed to record.
Press and hold SET (S) button for 5 sec-
onds to exit the lap record mode, the
previously selected mode will be dis-
played.
S) Top RPM
Records engine top revolution per
minute (RPM) since it has been reset.
To display engine top revolution per
minute, proceed as follows:
1. Press the MODE (M) button to se-
lect display.
mmo2007-009-066_m
NOTE: Display will flash for approxi-
mately 5 seconds, then will return to
the previously selected mode if display
is not changed.
2. While display flashes, press the SET
(S) button to scroll and select top
RPM (TOP_RPM) mode.
mmo2007-009-066_n
1. Top RPM (TOP_RPM) mode
3. Press the MODE (M) button to con-
firm selection or wait 5 seconds.
mmo2007-009-066_o
To reset, press the MODE (M) to select
mode.
mmo2007-009-066_m
Press and hold the SET (S) button
within 5 seconds to reset.
_______________
71