BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 76 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2010-009-004_a
TYPICAL
1. Rod
Secure rod to hitch using hairpin previ-
ously removed.
mmo2010-009-003_b
TYPICAL
1. Hairpin
2. Rod
NOTICE
To avoid damages to the
vehicle, always release hitch from its
support. Ensure hitch moves freely
when towing accessories.
mmo2010-009-005_a
HITCH MOVES FREELY WHEN TOWING
To avoid noise from hitch when not in
use, secure hitch to its support by us-
ing the hairpin.
mmo2010-009-006_a
HITCH NOT IN USE
1. Hitch
2. Hairpin
3. Support
17) Drive Belt Guard
Drive Belt Guard Removal
WARNING
NEVER operate engine:
– Without shields and belt guard
securely installed.
– With hood and/or side panels
opened or removed.
NEVER attempt to make adjust-
ments to moving parts while en-
gine is running.
NOTE:
Belt guard is purposely made
slightly oversize to maintain tension on
its pins and retainers preventing undue
noise and vibration. It is important that
this tension be maintained when rein-
stalling.
Remove tether cord cap from engine
cut-off switch.
Open engine compartment LH side
panel.
Remove retaining pin.
74
______________