BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 54 / 211

CONTROLS, INSTRUMENTS AND EQUIPMENT
mmo2013-004-019_b
TYPICAL
Step 1: Position seat in place
Step 2: Push seat forward until it latches
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
mmo2013-004-019
TYPICAL - SEAT INSTALLED
WARNING
Make sure seat is securely latched
before riding.
10) Tool Kit
A tool kit containing tools for basic
maintenance is supplied with the vehi-
cle.
The tools are located directly on the
pulley drive guard.
NOTICE
Make sure tools are se-
cured properly to avoid contact
with CVT (continuously variable
transmission). The driven pulley
expander is inserted through the
starter clip.
mmo2013-004-016_a
TYPICAL
1. Emergency rope
2. Wrench
3. Driven pulley expander
4. Suspension adjustment tool
5. Starter clip
11) Front and Rear
Bumpers
To be used whenever snowmobile re-
quires manual lifting.
CAUTION Beware of injuries
by using proper lifting techniques,
notably using your legs force. Do
not attempt to lift the rear of vehi-
cle if it is above your limits. Use
appropriate lifting device or have
assistance to share lifting stress if
possible.
52
______________