BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 101 / 211

TUNE YOUR RIDE
mmo2012-005-815_a
MX Z X-RS - rMOTION - ADJUSTABLE
COMPONENTS
1. Stopper strap
2. Center spring
3. Center shock absorber
4. Rear spring
5. Rear shock absorber
6. Coupling blocks (RH side shown)
NOTICE
Whenever adjusting rear
suspension, check track tension and
adjust if necessary.
Stopper Strap
Stopper strap length has an effect on
the amount of weight the center spring
has to carry especially during accelera-
tion, therefore on the front end uplift.
Stopper strap length also has an effect
on center spring travel.
NOTICE
Whenever stopper strap
length is changed, track tension
must be checked.
ACTION RESULT
Lighter ski
pressure under
acceleration
More center
spring travel Increasing stopper
strap length
More bump
absorption
capability
Heavier ski
pressure under
acceleration
Less center spring
travel
Decreasing
stopper strap
length
Less bump
absorption
capability
NOTE: Stopper strap could be set to
position 1, 2, 3, 4 and 5. Below are il-
lustrations for position 1, 2, 3. Smaller
numbers correspond to a longer strap
setting.
_______________
99