BRP Ski-Doo 1200 4-TEC 2018, Operator'S Manual

Page: 38 / 211

IMPORTANT ON-PRODUCT LABELS
mmo2008-008-023
LABEL 14 - ON BRAKE DISC GUARD (BARE
METAL TUNNEL)
This guard must
ALWAYS be in place
when engine
is running.
Ce garde doit TOUJOURS
être en place lorsque le
moteur fonctionne.
AVERTISSEMENT
WARNING
516005525
516005525
LABEL 14 - ON BRAKE DISC GUARD
(PAINTED TUNNEL)
• This shock absorber is pressurized.
• An explosion may occur if heated
or punctured.
• Do not disassemble.
WARNING
mmo2010-003-101_en
LABEL 15 - ON SHOCK GAS CHARGED
ABSORBERS
516005904A
LABEL 16
ENGINE OIL AND CERTAIN COMPOMENTS IN THE ENGINE COMPARTMENT
MAY BE HOT. DIRECT CONTACT MAY RESULT IN SKIN BURN.
CHECKING ENGINE OIL LEVEL
-
Make sure engine is at operating temperature.
- Vehicle must be level to perform verification.
- Let engine running at idle for at least 30 seconds.
- Stop engine and wait at least 30 seconds.
- Check oil level using the dipstick.
- The engine of this snowmobile has been developed and validated using
the BRP XPS
TM
Synthetic 4-stroke oil ( 293 600 112 ). BRP recommends the
use of its XPS TM approved lubricant or equivalent.
Damages caused by oil which is not suitable for this engine may not be
covered by the BRP limited warranty. See operator`s guide.
516007500
600 ACE, 900 ACE AND 1200 4-TEC MODEL -
IN ENGINE COMPARTMENT
36
_______
SAFETY INFORMATION
________