manualshive.com logo in svg

Breathe LIFE2000, Instructions For Use Manual

Share
Download
Breathe LIFE2000 Instructions For Use Manual Download Page 115

114

MAINTENANCE

8

PREVENTIVE MAINTENANCE

 

 WARNING: 

Unauthorized modifications can result in equipment damage, or patient injury or death.

 

 CAUTION: 

No user serviceable components are inside the device; do not attempt to repair any components inside the 

device.

Contact your Breathe Technologies® service representative to make arrangements for preventive maintenance, 

service, and component replacement per the chart below.
           

REVISION

VENTILATOR 

COMPRESSOR

Before Revision C

2.5 Years from ship date

1 Year from ship date

Revision C and after

2.5 Years from ship date

2.5 Years from ship date

The ventilation system can only be serviced or repaired by Breathe Technologies® or an authorized service 

center. Trained personnel and authorized service centers are provided with the proper documentation to maintain 

the ventilation system. 
When shipping the ventilation system, use proper packaging for protection.

NOTE:

 

The compressor contains a lithium ion battery. Before shipping the compressor, contact your 

transportation carrier for information.

 

 TIP:

The ventilation system is shipped in specially designed, protective boxes. Do not throw away the boxes; keep 

them for future transportation needs.

BATTERY REPLACEMENT

Contact your Breathe Technologies® service representative to make arrangements for replacing the ventilator or 

compressor battery if battery runtime degrades to an unacceptable level. The batteries can only be serviced or 

repaired by Breathe Technologies® or an authorized service center.

REV C

Summary of Contents for LIFE2000





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands