Trailer Crane AHK 30/1400
Operation
02/2008
123
8.
Insert the safety pin into the bolt.
9.
Swing up the safety bracket.
10. Repeat the work step on the opposite
side of the vehicle.
11. Start the motor and let it warm up, See
"Starting the Motor"
Fig. 150: Insert the bolt lock
WARNING! Danger to life!
Overturning the device can result in serious injury or death, and property
damage! Consequently:
–
Only maneuver on a solid substrate.
–
Only move the device via the maneuvering drive in transport position.
–
The telescoping mast must be in the receptacle on the chassis.
–
The outriggers must be completely dismounted.
–
When starting up the maneuvering drive all persons other than the operator must
stay at least 4 m away from the device.
–
Do not move the device via the maneuvering drive in public traffic.
ATTENTION! Property damage!
Misoperation of the maneuvering drive can result in severe property damage!
–
Check the air pressure prior to transport.
–
Only use the maneuvering drive for "short" distances.
–
Carefully position the device with the maneuvering drive and brake.
–
Avoid driving through tight curves.
–
Avoid jerky approach.
–
Do not drive over steps and other obstacles with the support wheel. If necessary
level out height differences with wedges.
–
After using the maneuvering drive, disconnect the drives from the wheel drive.