Trailer Crane AHK 30/1400
Operation
122
02/2008
7.6 Maneuvering Drive (optional)
Pos : 7.30 /Kothes! Networ k/Boeker/Bedienung/R angi erantrieb AHK EU Böc ker (00985) @ 10\mod_1147686605024_1.doc @ 99116
Brief movement of the device is possible without the tow vehicle, using the maneuvering
drive.
7.6.1 Activating Maneuvering Drive
ATTENTION! Risk of injury!
Crushing and jamming of body parts can result in low-severity to medium-
severity injuries.
–
When pushing the maneuvering drive down ensure that extremities do not get
between the gears.
1.
Switch off the motor and safeguard it
from being switched on again..
2.
Completely dismount the device, see
“Dismounting the Device".
3.
Swing down the support wheel and
crank up the device slightly, see
"Uncoupling, Parking".
4.
Swing up the lock ring (arrow) and
remove the safety pin.
Fig. 148: Remove the bolt lock
5.
Pull out bolt (1).
6.
Use the lever to push the maneuvering
drive (2) down.
7.
Stick the bolt in the lower bore (arrow).
If two teeth are directly opposed the
maneuvering drive cannot be pushed down. If
this is case turn the device slightly on the
drawbar.
Fig. 149: Maneuvering drive bolt