Black Box ServSelect KV119A, Installer/User Manual

Page: 50 / 84

CHAPTER 6: SCPS COMMANDS
49
When you are in port history mode, you may issue the following commands.
Port History Mode Commands
Command Description
B
ottom
B
sets the history view location to the bottom of the fi le
minus 23 history display lines, if available.
C
lear
C
clears the port’s history buffer.
N
ext
N
increments the current history display line by the number
of lines per page and a new history display page is output.
P
rev
P
decrements the current history display line by the number
of lines per page and a new history display page is output.
Q
uit
Q
returns to the normal CLI.
R
esume
R
exits port history mode and CLI mode, and resumes the
serial session with the attached serial device.
S
earch
S
searches the port history buffer for a specifi ed string.
Enclose strings containing embedded spaces in quotes.
To specify search direction, type
-u
(up) or
-d
(down). To
ignore case, type
-i
.
T
op
T
sets the current history display line to 1 and outputs a
history display page.
Examples
The following command accesses the serial port’s history mode.
> port history
In history mode, the following command searches the history buffer in the
downward direction for the string “connected to,” ignoring case.
PORT HISTORY > s -d -i “connected to”
Port Logout command
The Port Logout command terminates the SCPS session on a specified port.
Access: USER
Syntax
PORT <
port
> LOGOUT
Port Logout Command Parameter
Parameter Description
< port > Port number in the range 1-8 for an SCPS-8 or 1-16 for
an SCPS-16.