Black Box ServSelect KV119A, Installer/User Manual

Page: 27 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
26
To change the CLI access character:
Issue a Server CLI command or a Port Set command, using the Char parameter to
specify the CLI access character.
SERVER CLI CHAR=^<
char
>
- or -
PORT SET CHAR=^<
char
>
If you issue a Port Set command with Char=None, then the CLI access character
specified in the Server CLI command will be used.
For more information, see
Server CLI command
and
Port Set command
in Chapter 6.
To display CLI access character information:
Issue a Show Server CLI command.
SHOW SERVER CLI
For more information, see
Show Server CLI command
in Chapter 6.
Ending device sessions
To terminate a device connection:
Enter CLI mode and issue a Quit command or a User Logout command.
QUIT
- or -
USER LOGOUT <
username
>
- or -
If you initiated the device session with a Connect command, enter CLI mode and
issue a Disconnect command.
DISCONNECT
- or -
Allow the port to time-out due to inactivity. In this case, a notification message is
issued and the serial CLI session returns to CLI mode. This time-out may occur
while you are in CLI mode.
- or -
For modem connections, if a carrier drop occurs, the serial CLI session is
automatically logged off.
For more information, see
Disconnect Command
,
Quit Command
and
User Logout
command
in Chapter 6.