Black Box ServSelect KV119A, Installer/User Manual

Page: 18 / 84

CHAPTER 4: OPERATIONS
17
4. Operations
4.1 Overview
The SCPS and its ports can be easily configured and managed to meet your
requirements for device connection, user authentication, access control, device
session information display and SNMP compliance for use with third-party network
management products. Support for SSH (Secure Shell) access via third-party clients
is also provided.
4.2 Configuring Serial Port Settings
By default, the SCPS ports are configured with the following settings.
Baud rate 9600
Bits per character 8
Parity None
Stop bits 1
Flow control None
Time-out 15 minutes
CLI access character ^D
To change serial port settings:
Issue a Port Set command. You may specify settings for one or all ports.
PORT [<
port
>|ALL] SET [BAUD=<
baud_rate
>] [SIZE=<
size
>]
[PARITY=<
parity
>] [STOP=<
stop_bits
>] [FLOW=<
fl ow_ctrl
>]
[TIMEOUT=<
time-out>
] [SOCKET=<
socket
>] [CHAR=^<
cli_char
>]
[TOGGLE=NONE|DTR]
For more information, see Port Set command in Chapter 6.
To display serial port settings:
Issue a Show Port command.
SHOW PORT [<
port
>|ALL]
The display includes configuration information plus transmit, receive and error
counts. When you request information about a single port and a user is currently
accessing that port, the display also includes the username, access rights and other
information about the current session. For more information, see
Show Port
command
in Chapter 6.