Black Box ServSelect KV119A, Installer/User Manual

Page: 56 / 84

CHAPTER 6: SCPS COMMANDS
55
There are two program images that you can update in the SCPS FLASH. The BIOS/
Bootstrap image file (SCPSboot.img) contains the SCPS startup and self-test logic.
The application image (SCPSapp.img) contains the SCPS program that provides
SCPS functionality.
When you enter this command, you are asked if you want to reboot the SCPS, which
will initiate the actual FLASH update.
Access: SCON
Syntax
SERVER FLASH BOOT|APP
HOSTIP=<
tftp_add
>
IMAGE=<
host_file
>
Server FLASH Command Parameters
Parameter Description
BOOT Indicates the BIOS/Bootstrap image should be updated.
APP Indicates the application image should be updated.
HOSTIP=< tftp_add > IP address of TFTP server host.
IMAGE=< host_fi le > Name of fi le on TFTP server host containing the image fi le.
Example
The following command updates the SCPS boot image program using the image file
name c:\winnt\system32\drivers\scpsboot.img, which is located on the TFTP server
host located at 192.168.1.16.
> ser fla app 192.168.1.16 c:\winnt\system32\drivers\
scpsboot.img
Server PPP command
The Server PPP command enables or disables the PPP server on the serial CLI port.
For more information, see Connecting to devices using PPP in Chapter 4.
Once the PPP server has been configured with this command by specifying the
required addresses and masks, those values remain in the database. Later, if you
disable the PPP server and wish to reenable it with the same addresses, you don’t
need to specify the address values again.
When you enable the PPP server, the serial CLI port must already be defined.
When you enter this command, you are asked to confirm or cancel the specified changes.