Black Box ServSelect KV119A, Installer/User Manual

Page: 64 / 84

CHAPTER 6: SCPS COMMANDS
63
You must also have previously specified an authentication method other than None
with the Server Security command.
This command requires an SCPS reboot. For more information, see Connecting to
devices using SSH in Chapter 4.
Access: SCON
Syntax
SERVER SSH ENABLE|DISABLE [AUTH=<
auth
>]
Server SSH Command Parameter
Parameter Description
ENABLE|DISABLE Enables or disables SSH session access to the SCPS.
AUTH=< auth > SSH authentication methods. You must enter the entire
value; abbreviations are not permitted. Valid values are:
PW Password
authentication
KEY Key authentication
PW|KEY Password or key authentication
KEY|PW Key or password authentication
PW&KEY Password and key authentication
KEY&PW Key and password authentication
Default = PW
6.8 Show Commands
The Show command has several forms, as listed in the following table.
Show Command Summary
Command Description
Show Port Displays confi guration information and statistics for one or
all ports.
Show Port Alert Displays port alert strings.
Show Server Displays SCPS confi guration information and statistics.
Show Server CLI Displays SCPS CLI settings.
Show Server PPP Displays SCPS PPP settings.
Show Server RADIUS Displays SCPS RADIUS settings.
Show Server Security Displays SCPS authentication settings.
Show Server SNMP Displays SNMP confi guration information.
Show User Displays user confi guration and session information.