Black Box ServSelect KV119A, Installer/User Manual

Page: 29 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
28
If the specified user is currently logged in, a message is sent to the user indicating
that access is no longer permitted, and the user’s Telnet session is terminated. For
more information, see
User Delete command
in Chapter 6.
To display user con fi guration information:
1. To display information about one user, issue a Show User command, specifying
the username.
SHOW USER <
username
>
2. To display information about all users, issue a Show User command with the
All parameter.
SHOW USER ALL
For more information, see
Show User command
in Chapter 6.
Access rights
Most SCPS commands require the user to have access rights to use the command.
The access rights for each SCPS command are listed in Chapter 5. The following
table describes the access rights a user may be given.
Access Rights
Access Right Description
PCON The Port Confi guration access right should be given to
users who must modify port settings. Grant PCON access
only to users who need to issue the Port Set command.
SCON The Server Confi guration access right should be given to
users who must change SCPS confi gurations, including
setting the IP address and updating the SCPS program
load in FLASH. Grant SCON access only to users who
need to administer the SCPS.
SMON The Server Monitor access right should be given to users
who need to view SCPS status and monitor serial port
activity. Grant SMON access only to users who need to
assist other users in accessing attached serial devices.
USER The User access right should be given to users who need
to modify the user database. Grant User access only to
users who need to add users, change user passwords,
change user access rights or delete users. At least one
user must have User access rights; otherwise, the user
database cannot be changed.