Black Box ServSelect KV119A, Installer/User Manual

Page: 22 / 84

CHAPTER 4: OPERATIONS
21
For more information, see
Show Server CLI command
and
Server PPP command
in
Chapter 6.
To display PPP con fi guration information:
Issue a Show Server PPP command.
SHOW SERVER PPP
For more information, see
Show Server PPP command
in Chapter 6.
Configuring and using dial-in connections
You can attach an external modem to the SCPS serial CLI port for dial-in serial CLI
access to the SCPS. This may be used as a backup connection if the SCPS is not
accessible from the network. It may also be used as a primary connection at remote sites
that do not have Ethernet network capability. The modem must be Hayes compatible.
To specify a modem initialization string:
1. Issue a Show Server CLI command to ensure that the port where the modem is
connected has been defi ned as the serial CLI port.
SHOW SERVER CLI
2. Issue a Server CLI command, using the Modeminit parameter to specify the
modem initialization string.
SERVER CLI MODEMINIT=“<
string
>”
The string must be enclosed in quotes and must include at least the command
settings ATV1 and SO=1, which cause the modem to issue verbose response
strings and to auto-answer the phone on the fi rst ring. For more information,
see
Server CLI command in Chapter 6.
The modem initialization string is sent to the cabled modem when any of the
following conditions occur:
• SCPS initialization
• Detection of a transition of DSR from low to high
• Completion of a call when DCD changes from high to low
3. Upon successful modem connection, press the
Enter
key until the login
prompt appears.
To display modem con fi guration information:
Issue a Show Server CLI command.
SHOW SERVER CLI