Black Box ServSelect KV119A, Installer/User Manual

Page: 37 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
36
2. To disable SNMP processing, issue a Server SNMP command with the
Disable parameter.
SERVER SNMP DISABLE
For more information, see
Server SNMP command
in Chapter 6.
To specify SNMP community names:
Issue a Server SNMP Community command, using the Readcomm, Writecomm and
Trapcomm parameters to specify community names.
SERVER SNMP COMMUNITY READCOMM=<
name
>
WRITECOMM=<
name
> TRAPCOMM=<
name
>
Although all three community names default to public, if you specify a trap
community name with this command, it must be different from the read and write
community names.
For more information, see Server SNMP Community command in Chapter 6.
To add or delete SNMP management entity addresses:
1. To add an SNMP management entity address, issue a Server SNMP Manager
command with the Add parameter and the management entity’s IP address.
You may defi ne up to four SNMP management entity addresses, using
separate commands.
SERVER SNMP MANAGER ADD <
ip_address
>
When you defi ne at least one SNMP manager, SNMP requests are processed if
they are from one of the defi ned SNMP managers. If a request is not from one of
the defi ned SNMP managers, the SNMP request is discarded.
2. To delete an SNMP management entity address, issue a Server SNMP Manager
command with the Delete parameter and the management entity’s IP address.
SERVER SNMP MANAGER DELETE <
ip_address
>
For more information, see Server SNMP Manager command in Chapter 6.
To enable or disable SNMP traps:
1. To enable SNMP traps, issue a Server SNMP Trap command with the
Enable parameter.
SERVER SNMP TRAP ENABLE
The SCPS will display a numbered list of traps that are currently disabled with
a prompt requesting you to select trap(s) to enable. Indicate the traps to be
enabled by entering a trap’s list number, several numbers separated by commas,