Black Box ServSelect KV119A, Installer/User Manual

Page: 59 / 84

SERVSELECT™ IP SCPS INSTALLER/USER GUIDE
58
The following command deletes the primary RADIUS server definition.
> ser radius primary del
Server Reboot command
The Server Reboot command reboots the SCPS. During a reboot, any active Telnet
sessions, including your own, are terminated, and all users are informed accordingly.
Any SCPS configuration changes that require a reboot will become effective when
the reboot completes. When you enter this command, you are asked to confirm or
cancel the reboot.
Access: SCON
Syntax
SERVER REBOOT
Server Security command
The Server Security command specifies how authentication will be performed. For
more information, see Using Authentication Modes and Encryption in Chapter 4.
When you enter this command, you are asked to confirm or cancel the
specified information.
Access: SCON
Syntax
SERVER SECURITY AUTHENTICATION=<
auth_mode
>
Server Security Command Parameter
Parameter Description
AUTHENTICATION= Authentication mode. Valid values are:
<
auth_mode > LOCAL - Use the local SCPS user database to
authenticate users.
RADIUS - Use the previously defi ned RADIUS server(s) to
authenticate users.
LOCAL,RADIUS - Use the local SCPS user database to
authenticate users. If that fails, use the previously defi ned
RADIUS server(s).
RADIUS,LOCAL - Use the previously defi ned RADIUS
server(s) to authenticate users. If that fails, use the local
SCPS user database.
NONE - Do not authenticate users. This mode cannot be
used when SSH access is enabled.
Default = LOCAL