Black Box ServSelect KV119A, Installer/User Manual

Page: 58 / 84

CHAPTER 6: SCPS COMMANDS
57
Syntax
SERVER RADIUS PRIMARY|SECONDARY
IP=<
radius_ip
>
SECRET=<
secret
>
USER-RIGHTS=<
attr
>
[AUTHPORT=<
udp
>]
[TIMEOUT=<
time-out
>]
[RETRIES=<
retry
>]
- or -
SERVER RADIUS PRIMARY|SECONDARY DELETE
Server RADIUS Command Parameters
Parameter Description
PRIMARY Indicates the primary RADIUS server is being defi ned
or deleted.
SECONDARY Indicates the secondary RADIUS server is being defi ned
or deleted.
IP=< radius_ip > IP address of the RADIUS authentication server.
SECRET=< secret > 8-24 character text string for shared secret with the RADIUS
server. Enclose the string in quotes if it contains spaces.
USER-RIGHTS=< attr > Attribute number defi ned on the RADIUS server, in the
range 1-255.
AUTHPORT=< udp > UDP port for RADIUS authentication server, in the range
1-65535. This value is usually 1645, but may be 1812.
Default = 1645
TIMEOUT=< time-out > Number of seconds to wait for a response from the
RADIUS server, in the range 1-60.
Default = 5
RETRIES = < retry > Number of attempts to make to authenticate a user after a
time-out, in the range 1-10.
Default = 3
DELETE Deletes the RADIUS server defi nition.
Examples
The following command specifies primary RADIUS server information; default
values will be used for the UDP port, time-out and retries values.
> ser radius primary ip=192.168.0.200 secret=ThePrimaryRadSe
cret user-rights=86